Configuring Connectivity
LOGIQ 7 Basic User Manual 16-83
Direction 2392206-100 Rev. 1
DICOM Print
DICOM Print provides the ability to send or receive ultrasound
image data to DICOM printers.
Figure 16-58. DICOM Print Service
Table 16-47: Settings
Preset Parameter Description
Format Indicates how many prints to print per page, for example, 1,1, 1,2, 1,3, up to 5,5.
Partial prints are displayed as one print job.
Priority Specify the print job priority: High, Medium, or Low.
Medium Select the print medium: Clear Film, Paper, or Blue Film.
Copies Enter the number of copies.
Orientation Specify whether to print the image Portrait (vertically) or Landscape (horizontally).
Film Size Specify the dimensions of the film size: 8INx10IN, 10INx12IN, 10INx14IN, or
11INx14IN.
Film Destination Specify the film destination for the exposed filmMagazine – Store in a film
magazineProcessor – Develop in a film processor
Magnification Specify how the printer magnifies the image to fit it onto the film.Replicate –
Interpolated pixel are copies of the adjacent pixelsBilinear – Interpolated pixels are
created by bilinear interpolations between the adjacent pixelsCubic – Interpolated
pixels are created by cubic interpolations between the adjacent pixelsNone – No
interpolation
Smoothing Type Specify the printer’s magnification interpolation for the output.
Trim Specify whether you want a trim box to be printed around each image on the film:
Yes or No.
Min Density Enter a number indicating the minimum density level of the film.
To Next Page
Loading...
Need help?
General
