GE LOGIQ 7

System Care and Maintenance
LOGIQ 7 Online Help 18-13
Direction 2392536-100 Rev. 1
Footswitch
To clean the footswitch:
1. Moisten a soft, non-abrasive folded cloth with a mild,
general purpose, non-abrasive soap and water solution.
2. Wipe the external surfaces of the unit then dry with a soft,
clean, cloth.
VCR
To clean the VCR:
1. Turn off the VCR power. If possible, disconnect the power
cord.
2. Wipe the external surfaces of the unit with a soft, clean, dry
cloth.
NOTE: Do not use a wet cloth or any cleaning fluid because it may enter
and damage the unit.
1. Clean the record and playback heads with a soft, non-
abrasive cleaning system, according to the manufacturer's
instructions.
For more information, see the VCR's Operator Manual.