Hitachi WJ C1 Series User Manual

Chapter 1 Safety Instructions/Risks
1-2-2
1.2.2 Precautions for Installation
WARNING
Fire
● Risk of Fire!
Prohibited
 Do not place flammable materials near the installed inverter.
 Prevent foreign matter (e.g., cut pieces of wire, sputtering welding materials,
iron chips, wire, and dust) from entering the inverter.
DO
 Install the inverter on a non-flammable surface, e.g., metal.
 Install the inverter in a well-ventilated indoor site not exposed to direct
sunlight. Avoid places where the inverter is exposed to high temperature, high
humidity, condensation, dust, explosive gases, corrosive gases, flammable
gases, grinding fluid mist, hydrogen sulfide or salt water.
Injury
● Risk of injury!
Prohibited
 Do not install and operate the inverter if it is damaged or parts are missing.
Fall
Injury
● Risk of injury due to the inverter falling!
Prohibited
 When carrying the inverter, do not hold its cover parts.
DO
 Install the inverter on a structure able to bear the weight specified in the User's
Guide.
 Install the inverter on a vertical wall that is free of vibrations.
Failure
● Risk of failure of the inverter!
Prohibited
 The inverter is a precision equipment. Do not allow it to fall or be subject to
high impacts.
 Also do not step on it, or place a heavy load on it.
 Avoid places where static electricity discharges often occur (for example, on a
rug) for the operation of the product.
DO
 In order to discharge static electricity from your body, touch a safe metal
surface first before starting the operation.

Hitachi WJ C1 Series Specifications

General

Brand	Hitachi
Model	WJ C1 Series
Category	Inverter
Language	English