Hitachi WJ C1 Series User Manual

Chapter 1 Safety Instructions/Risks
1-2-3
1.2.3 Precautions for Wiring
DANGER
Electric
shock
Fire
● Risk of an electric shock and fire!
DO
 Be sure to ground the inverter.
 Entrust wiring work to a qualified electrician.
 Before the wiring work make sure to turn off the power supply and wait for
more than 10 minutes. (Confirm than the charge lamp is OFF and the voltage
between terminals [P/+] and [N/-] is 45 VDC or less.)
Failure
● Risk of failure of the inverter!
Prohibited
 Do not pull the wire after wiring.
Electric
shock
Injury
● Risk of an electric shock and injury!
DO
 Perform the wiring only after installing the inverter.

Hitachi WJ C1 Series Specifications

General

Brand	Hitachi
Model	WJ C1 Series
Category	Inverter
Language	English