D2 Series Servo Drive User Manual Drive Configuration
HIWIN MIKROSYSTEM CORP. 5-5
Figure5.1.2.2
(2) Using mega-ulink communication
At the first usage of mega-ulink communication, download and install WinPcap. After installing
WinPcap is done, open the “lightening Communication Setup” window described in the previous
subsection, as shown in figure 5.1.2.2. Select the radio button for “Ethercat” and click the “EtherCat”
button, as shown in figure 5.1.2.3.
To Next Page
Loading...
