board.
9. Rotate (lift) the air deflector
1
out of the way, as shown in Figure 120.
10. Slightly lift the back plate out of the node. Disconnect power cable connectors P2
1
and P3
2
,
shown in Figure 121 on page 119, and remove the back plate.
Figure 119. SAN Volume Controller 2145-8A4 SATA cable connectors
svc00485
1
Figure 120. Air deflector for the SAN Volume Controller 2145-8A4 power supply
118 IBM SAN Volume Controller Hardware Maintenance Guide
To Next Page
Loading...
Need help?
General