Redundant ac-power switch parts
There is a single field-replaceable unit (FRU) assembly for the redundant ac power feature. It consists of
the switch and two input-power cables.
The redundant ac-power switch is an optional feature that makes the SAN Volume Controller nodes
resilient to the failure of a single power circuit. The redundant ac-power switch is not a replacement for
an uninterruptible power supply. You must still use a uninterruptible power supply for each node.
Figure 6 shows the redundant ac-power switch.
Table 17 lists the part numbers for the redundant ac-power switch.
Table 17. Redundant ac-power switch
Part number Units Description
31P0896 1 Redundant ac-power switch assembly
2145 UPS-1U parts
The 2145 UPS-1U is assembled from four separate parts.
A 2145 UPS-1U powers one SAN Volume Controller node. Figure 7 on page 17 shows the parts that make
up the 2145 UPS-1U.
svc00297
Figure 6. View of the redundant ac-power switch FRU
16 IBM SAN Volume Controller Hardware Maintenance Guide
To Next Page
Loading...
Need help?
General
