54. Installing the front of a SAN Volume
Controller 2145-CF8 slide rail in the front of
the rack ..............60
55. SAN Volume Controller 2145-8A4 support-rails
installation kit............60
56. A closed rail-locking carrier at the front of the
support rail for the SAN Volume Controller
2145-8A4 .............61
57. An open rail-locking carrier at the rear of the
support rail for the SAN Volume Controller
2145-8A4 .............62
58. Aligning the pins on the left front support rail
for the SAN Volume Controller 2145-8A4 with
the front mounting flange ........63
59. SAN Volume Controller 2145-8G4 support rails
installation kit............64
60. Inserting the right slide rail into the rear rack
mounting flange ...........64
61. Extending the right slide rail .......65
62. Attaching the latch strike to the front of the
slide rail .............65
63. Retracting the latch-lock carrier ......66
64. Opening the front latch-lock carrier assembly 66
65. Opening the back latch-lock carrier assembly 67
66. Installing the front end of the rail .....67
67. Closing the latch-lock carrier assembly . . . 68
68. Removing the SAN Volume Controller
2145-CF8 cover ...........69
69. Removing the SAN Volume Controller
2145-8A4 cover ...........70
70. The SAN Volume Controller 2145-8G4 with fan
door open .............71
71. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 with fan doors
open ...............72
72. Replacing the SAN Volume Controller
2145-CF8 cover ...........73
73. Raising the SAN Volume Controller 2145-CF8
locking levers of the slide rails of the rack . . 73
74. SAN Volume Controller 2145-8G4 with the fan
door open .............74
75. SAN Volume Controller 2145-8F2 with the
access doors open ..........75
76. Left release button of a SAN Volume
Controller 2145-CF8 service controller....77
77. Service controller for the SAN Volume
Controller 2145-CF8 with attached USB cable . 77
78. SAN Volume Controller 2145-CF8 service
controller .............78
79. Removing and replacing the USB cable in the
SAN Volume Controller 2145-CF8 service
controller .............79
80. USB service-controller cable connected to the
disk controller and USB riser card in the SAN
Volume Controller 2145-CF8 .......80
81. USB service-controller cable connector on the
USB riser card ...........81
82. SAN Volume Controller 2145-8A4 service
controller release button ........82
83. SAN Volume Controller 2145-8G4 service
controller release button ........83
84. Removing the service controller from the SAN
Volume Controller 2145-8G4 .......83
85. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 with fan doors
open ...............84
86. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 service controller . 85
87. SAN Volume Controller 2145-CF8 service
controller .............86
88. Raising the SAN Volume Controller 2145-CF8
locking levers of the slide rails of the rack . . 87
89. SAN Volume Controller 2145-8A4 service
controller .............88
90. SAN Volume Controller 2145-8G4 service
controller .............89
91. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 service controller . 91
92. SAN Volume Controller 2145-8F2 or SAN
Volume Controller 2145-8F4 with fan doors
open ...............91
93. Power LED on the SAN Volume Controller
models 2145-CF8, 2145-8A4, 2145-8G4, and
2145-8F4 or 2145-8F2 operator-information
panel...............93
94. SAN Volume Controller models 2145-CF8,
2145-8A4, 2145-8G4, and 2145-8F4 or 2145-8F2
power-control button .........94
95. Locating the SAN Volume Controller 2145-CF8
memory modules ..........95
96. Locating the SAN Volume Controller 2145-8A4
memory modules ..........96
97. Locating the SAN Volume Controller 2145-8G4
memory modules ..........96
98. Locating the SAN Volume Controller 2145-8F2
or SAN Volume Controller 2145-8F4 memory
modules .............97
99. Removing the memory modules .....98
100. Replacing a memory module.......99
101. SAN Volume Controller 2145-8A4 SATA disk
drive ..............100
102. Removing the SATA disk drive .....101
103. SAN Volume Controller 2145-4F2 disk drive
and front panel ...........102
104. Attaching the rails to the SAN Volume
Controller 2145-4F2 disk drive ......102
105. Boot drive for the SAN Volume Controller
2145-CF8 .............104
106. Drive-bay filler panel and disk-drive handle
for the SAN Volume Controller 2145-CF8 . . 104
107. Drive IDs for SAN Volume Controller
2145-CF8 .............105
108. SAN Volume Controller 2145-8A4 SATA disk
drive ..............106
109. Removing the SATA disk drive .....107
110. Drive-bay filler panel and disk-drive handle
for the SAN Volume Controller 2145-CF8 . . 108
111. Raising the SAN Volume Controller 2145-CF8
locking levers of the slide rails of the rack . . 109
vi IBM SAN Volume Controller Hardware Maintenance Guide
To Next Page
Loading...
Need help?
General
