Intermec Antares 2420

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
3-10
Filling In Fields and Marking Check Boxes
Screens list the options for each configuration parameter, diagnostic, or system option.
Below each option name is either a toggle field or an entry field:
• In a toggle field, you press ; or W to view the options for that field.
• In an entry field, you type a value into the field. To edit the data in an entry field, use
the d or  d keys. You can also use the Delete (  ) and Insert (  )
keys to edit an entry field.
For example, the Code 49/Code 16K screen has toggle and entry fields. The Code 49
field is a toggle field. Press W to toggle between Enabled and Disabled. The Function
Codes field for F1, F2, and F3 are entry fields. You type a value into the field for each
function code.
CODE 49 / CODE 16K
Code 49: Enabled
Code 49
Function Codes:
F1:
F2: \x0D\x0A
F3:
Code 16K:
Standard
242XU.052
OK CANCEL
Some screens contain check boxes. Check boxes are used when you can select more than
one option at one time.
To mark or clear check boxes
• Press d . For example, to disable the Backlight reader command, choose the
Backlight check box and press d to clear the check box.
READER COMMAND MENU
[Space] to enable or
disable a command
[X] Abort Program
[X] Backlight
[X] Backspace
[X] Change Config
[X] Clear
[X] Default Config
[X] Delete File
[X] Enter Accum
[X] Exit Accum
[X] List Files
242XU.053
OK
more
CANCEL
[X] Multi-Read
[X] Receive File
[X] Rename File
[X] Reset
[X] Run Program
[X] Scanner On
[X] Scanner Off
[X] Test & Service
[X] Transmit File
_