Intermec Antares 2420

Nugg
Co de 39
Reader Command Reference
8-15
8
Delete File
Purpose: Deletes a file from a drive on the terminal.
From Network: ..--
drive:filename
where:
..–– is the command to delete a file.
drive:
indicates the drive where you want to delete a file. You must include
the colon (:) after the drive letter.
filename
is the file you want to delete.
Keypad: In the TRAKKER Antares 2400 Menu System, choose System Menu, and then choose
File Manager. Next, choose the drive where you want to delete files.
Scan: 1. Scan this bar code label:
Enter Accumulate Mode / Delete File
*+/..--*
*+/..--*
2. Scan the bar code label(s) for the file you want to delete. You can scan labels from
the “Full ASCII Bar Code Chart” in Appendix B. The label must use this format:
drive:filename
3. Scan this bar code label to exit Accumulate mode and delete the file.
Exit Accumulate Mode
*-/*
*-/*
Or: You can create your own bar code labels to delete files by creating a bar code in this
command format:
..-- drive:filename
Example: To delete the file
SHIPPING.BIN
from drive C, use this command:
..--c:shipping.bin