TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-76
Network Activate
Purpose: Enables or disables network communications between the T2425 and other devices in the
2.4 GHz RF network. When you enable this parameter, the terminal attempts to establish
communications with the DCS 300 or host computer. When you disable this parameter,
the network is disabled, no RF communications are provided, and the radio is turned off.
Note: You must enable the Network Activate parameter to use the T2425 for RF data
collection.
Syntax: NAdata
Acceptable values for data are:
0 Disabled
1 2.4 GHz RF network (enabled)
Default: Disabled
Scan: One of these bar codes:
Disable Network Activate Enable 2.4 GHz RF Network
*$+NA0* *$+NA1*
*$+NA0* *$+NA1*
To Next Page
Loading...
