Intermec Antares 2420 - Defining the System Diagnostics Screens; Access Point

Nugg
Co de 39
Running Diagnostics
7-19
7
Defining the System Diagnostics Screens
Each system diagnostic screen is defined in this section.
Access Point
Purpose: Use the Access Point screen to get version and address information about the access point
the terminal is communicating with across the 2.4 GHz RF network.
Note:
The Access Point diagnostic applies only to the T2425.
Where Available: System Diagnostics menu
Sample Screen:
242XU.139
ACCESS POINT
Radio ROM Ver:
V1.6EB
Radio MAC Addr:
0020A6306510
Access Point Name:
SHIPPING
Access Point MAC:
0020A6301365
[Esc] Exit
Definition: The screen displays the radio ROM firmware version, radio MAC (machine) address, the
access point name, and the access point MAC. If you have a problem with the radio or
the connection to the access point, use the information on this screen to troubleshoot your
network configuration.