nuggetf
code39
Before You Begin
xvii
Before You Begin
This section introduces you to standard warranty provisions, safety precautions,
warnings and cautions, document formatting conventions, and sources of additional
product information. A list of Intermec manuals is also provided to guide you in finding
the appropriate information.
Warranty Information
To receive a copy of the standard warranty provision for this product, contact your local
Intermec support services organization. In the U.S. call 1-800-755-5505, and in Canada
call 1-800-688-7043. Otherwise, refer to the Worldwide Sales & Service list that ships
with this manual for the address and telephone number of your Intermec sales
organization.
Safety Summary
Your safety is extremely important. Read and follow all warnings and cautions in this
book before handling and operating Intermec equipment. You can be seriously injured,
and equipment and data can be damaged if you do not follow the safety warnings and
cautions.
Do not repair or adjust alone Do not repair or adjust energized equipment alone under
any circumstances. Someone capable of providing first aid must always be present for
your safety.
First aid Always obtain first aid or medical attention immediately after an injury. Never
neglect an injury, no matter how slight it seems.
Resuscitation Begin resuscitation immediately if someone is injured and stops
breathing. Any delay could result in death. To work on or near high voltage, you should
be familiar with approved industrial first aid methods.
Energized equipment Never work on energized equipment unless authorized by a
responsible authority. Energized electrical equipment is dangerous. Electrical shock from
energized equipment can cause death. If you must perform authorized emergency work on
energized equipment, be sure that you comply strictly with approved safety regulations.
Note: For laser compliance and safety information, refer to the manual supplement that
shipped with your TRAKKER
®
Antares
™
2420 or 2425 terminal.