Co de 39
Nugget
Configuration Command Reference
9-89
9
Resume Execution
Purpose: Defines the way in which the terminal resumes when you press
L
to turn on the terminal.
If you set this parameter to resume execution not allowed and you press
L
to turn on the
terminal, the terminal will boot and restart the application that was running when you
turned off the terminal. If you set this parameter to resume execution allowed and press
L
to turn on the terminal, the terminal resumes exactly where it was when you turned off
the terminal.
Syntax: ER
data
Acceptable values for
data
are:
0 Not allowed
1 Allowed
Default: Allowed
Scan: One of these bar codes:
Resume Execution Not Allowed Resume Execution Allowed
*$+ER0* *$+ER1*
*$+ER0* *$+ER1*
To Next Page
Loading...
