Intermec Antares 2420

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-66
Keypad Caps Lock
Purpose: Turns the caps lock on and off. With the caps lock turned on, all alphabetic characters
you type on the keypad will be uppercase or capital letters.
Syntax: KAdata
Acceptable values for data are:
0Caps lock off
1Caps lock on
Default: Caps lock off
Scan: One of these bar codes:
Caps Lock Off Caps Lock On
*$+KA0* *$+KA1*
*$+KA0* *$+KA1*
Keypad Clicker
Purpose: Enables or disables the keypad clicker. The terminal sounds a click each time you press a
key or decode a row of a two-dimensional symbology.
Note: If the Beep Volume command is set to off, you will not hear any audio signals
including the keyclick.
Syntax: KCdata
Acceptable values for data are:
0 Disable keypad clicker
1 Enable keypad clicker
Default: Enabled
Scan: One of these bar codes:
Disable Keypad Clicker Enable Keypad Clicker
*$+KC0* *$+KC1*
*$+KC0* *$+KC1*