Intermec Antares 2420 - Display Row Spacing

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-52
Display Row Spacing
Purpose: Sets the row spacing on the terminals. Row spacing lets you define the amount of
additional space (scan lines) between the lines on the screen. The number of scan lines is
two times the value you set for the row spacing. A scan line is a row of pixels. For
example, a row spacing of 8 adds 16 blank scan lines between lines on the screen
Syntax: DLdata
Acceptable values for data are any number from 0 to 8.
Default: 0
Scan: One of these bar codes:
Set Row Spacing to 0 Set Row Spacing to 1
*$+DL0* *$+DL1*
*$+DL0* *$+DL1*
Set Row Spacing to 2 Set Row Spacing to 3
*$+DL2* *$+DL3*
*$+DL2* *$+DL3*
Set Row Spacing to 4 Set Row Spacing to 5
*$+DL4* *$+DL5*
*$+DL4* *$+DL5*
Set Row Spacing to 6 Set Row Spacing to 7
*$+DL6* *$+DL7*
*$+DL6* *$+DL7*
Set Row Spacing to 8
*$+DL8*
*$+DL8*