Intermec Antares 2420 - Display Video Mode

Co de 39
Nugget
Configuration Command Reference
9-53
9
Display Video Mode
Purpose: Sets the Display Video mode that is used on the terminal screen. You can set the Display
Video mode to original, normal, or inverse. Original displays black characters on a white
background. Normal displays black characters on a white background. Inverse displays
white characters on a black background.
Syntax: DN
data
Acceptable values for
data
are:
0 Original
1Normal
2 Inverse
Default: Original
Scan: One of these bar codes:
Original Display Video Mode Normal Display Video Mode
*$+DN0* *$+DN1*
*$+DN0* *$+DN1*
Inverse Display Video Mode
*$+DN2*
*$+DN2*