Intermec Antares 2420 - Equipment You Need to Get Started

nuggetf
code39
Getting Started
1-7
1
Equipment You Need to Get Started
To use the TRAKKER Antares 2420 terminal, you need this equipment:
• Lithium-ion battery pack
• Battery charger
• TRAKKER Antares Programmer’s Software Kit or EZBuilder

(to develop
applications)
• Communications dock, optical link adapter, serial interface module, or modem
• RS-232 cable (3-wire or 5-wire null modem) to connect the terminal to a host or an
RJ11 cable to connect the terminal to a phone connection
To use the TRAKKER Antares 2425 terminal, you need this equipment:
• Lithium-ion battery pack
• Battery charger
• Access point
• DCS 300 for T2425s that use the UDP Plus option
• TRAKKER Antares Programmer’s Software Kit or EZBuilder (to develop
applications)
To use the serial port on the T2425, you also need this equipment:
• Communications dock, optical link adapter, or serial interface module
• RS-232 cable (3-wire or 5-wire null modem) to connect the terminal to a host