Intermec Antares 2420

Co de 39
Nugget
Configuration Command Reference
9-51
9
Display Font Type
Purpose: Selects the type or size of font that is used on the terminal screen. You can set a regular
size font (8x8), a font with double-height characters (8x16), or a font with double-width
and double-height characters (16x16).
Syntax: DT
data
Acceptable values for
data
are:
0 8 pixels by 8 pixels (8x8) font
1 8 pixels wide by 16 pixels high (8x16) font
2 16 pixels wide by 16 pixels high (16x16) font
Default: 8x8
Scan: One of these bar codes:
Set Display Font Type to 8x8 Set Display Font Type to 8x16
*$+DT0* *$+DT1*
*$+DT0* *$+DT1*
Set Display Font Type to 16x16
*$+DT2*
*$+DT2*