Intermec Antares 2420 - Enter Accumulate Mode; Backspace; Clear

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
N
ugg
Co de 39
8-6
Enter Accumulate Mode
Purpose: Enters Accumulate mode. You can accumulate data from a series of bar code labels and
enter them as a single label.
From Network: Not supported
Keypad: Not supported
Scan:
Enter Accumulate Mode
*+/*
*+/*
Backspace
Purpose: Deletes the last character from the current data record being accumulated. If there is no
data in the buffer, the command has no effect.
From Network: Not supported
Keypad: Not supported
Scan:
Backspace
*-+*
*-+*
Clear
Purpose: Deletes the entire data record you are accumulating. If there is no data in the buffer, the
command has no effect.
From Network: Not supported
Keypad: Not supported
Scan:
Clear
*--*
*- -*