Intermec Antares 2420

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-4
Configuration Commands Listed by Category
This chapter lists the configuration commands in alphabetical order. Use this next list to
find the configuration commands you may need to set for bar code symbologies,
operations, serial network communications, or RF network communications.
Bar Code Symbologies Operations
Codabar, 9-16 Append Time, 9-10
Code 11, 9-17 Automatic Shutoff, 9-11
Code 16K, 9-18 Beep Volume, 9-15
Code 2 of 5, 9-19 Command Processing, 9-34
Code 39, 9-21 Decode Security, 9-46
Code 49, 9-25 Display Backlight Timeout, 9-49
Code 93, 9-27 Display Contrast, 9-50
Code 128, 9-28 Display Font Type, 9-51
Interleaved 2 of 5, 9-64 Display Row Spacing, 9-52
MSI, 9-75 Display Video Mode, 9-53
Plessey, 9-82 Flash Memory Configuration, 9-57
UPC/EAN, 9-118 Keypad Caps Lock, 9-66
Keypad Clicker, 9-66
Keypad Type, 9-67
Postamble, 9-84
Preamble, 9-85
RAM Drive Size, 9-87
Resume Execution, 9-89
Scan Ahead, 9-95
Scanner Mode, 9-96
Scanner Redundancy, 9-97
Scanner Selection, 9-98
Scanner Timeout, 9-100
Scanner Trigger, 9-101
Suspend/Resume Control, 9-108
Time and Date, 9-114
Time in Seconds, 9-115