Intermec Antares 2420

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-100
Scanner Timeout
Purpose: Defines the maximum length of time the scanner stays after you press the Scan button or
activate a cabled laser scanner.
Syntax: SAdata
Acceptable values for data are:
0 Disabled
1-60 Shutoff time in seconds
Default: Disabled (no timeout)
Scan: To disable the scanner timeout, scan this bar code label:
Disable Scanner Timeout
*$+SA0*
*$+SA0*
Or: To set the scanner timeout:
1. Scan this bar code:
Enter Accumulate Mode / Set Scanner Timeout
*+/$+SA*
*+/$+SA*
2. Scan a numeric value for data from these bar codes:
*0* *1*
*0* *1*
*2* *3*
*2* *3*
*4* *5*
*4* *5*
*6* *7*
*6* *7*
*8* *9*
*8* *9*