Intermec Antares 2420 - Time and Date

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-114
Time and Date
Purpose: Sets the time and date on the terminal.
Syntax: DBdata
Acceptable values for data are 12 digits corresponding to:
yy 00-99 Year
mm 01-12 Month of the year
dd 01-31 Day of the month
hh 00-23 Hour
mm 00-59 Minutes
ss 00-59 Seconds
Year values (yy) from 00 to 95 are interpreted as 2000 through 2095. Year values from
96 to 99 are interpreted as 1996 through 1999.
Default: 960101120000
Scan: To set the time and date:
1. Scan this bar code:
Enter Accumulate Mode / Set Time and Date
*+/$+DB*
*+/$+DB*
2. Scan a numeric value for each digit from these bar codes:
*0* *1*
*0* *1*
*2* *3*
*2* *3*
*4* *5*
*4* *5*
*6* *7*
*6* *7*
*8* *9*
*8* *9*