Intermec Antares 2420 - Scanner Mode

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-96
Scanner Mode
Purpose: Defines how the scanner operates when you press the Scan button or activate a cabled
laser scanner. There are two types of modes:
• In One-Shot mode, you must press the Scan button or activate the cabled laser
scanner each time you want to scan a bar code. Once you scan a bar code, the
scanner turns off.
• In Automatic (Auto-trigger) mode, you press the Scan button once or activate the
cabled laser scanner once to scan a series of bar codes. When you release the button
or trigger, the scanner turns off. To scan the same bar code more than once, you must
release the Scan button or trigger, or scan a different bar code before attempting a
second scan.
Syntax: SBdata
Acceptable values for data are:
0 One-Shot mode
1 Automatic mode
Default: One-Shot mode
Scan: One of these bar codes:
Enable One-Shot Mode Enable Automatic Mode
*$+SB0* *$+SB1*
*$+SB0* *$+SB1*