Intermec Antares 2420

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-92
RF Inactivity Timeout (continued)
*6* *7*
*6* *7*
*8* *9*
*8* *9*
3. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
RF Roaming Flag
Purpose:
Determines whether or not the T2425 radio can roam between access points. All access
points are master stations and each master has a unique channel. If you have five access
points in one domain, the T2425 will connect to one access point when you turn it on.
This access point becomes the master station for the T2425. When you set the RF
roaming flag to “Not Allowed,” the T2425 will only communicate with the master station
(access point) to which it first connects. If you allow roaming, the T2425 can
communicate with any access point in the same domain.
Syntax:
RR
data
Acceptable values for
data
are:
0 Allowed
1 Not allowed
Default:
Allowed
Scan:
One of these bar codes:
RF Roaming Allowed RF Roaming Not Allowed
*$+RR0* *$+RR1*
*$+RR0* *$+RR1*