Intermec Antares 2420 - Operating Reader Commands; Backlight on and off

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
N
ugg
Co de 39
8-8
Operating Reader Commands
This section explains the reader commands that you can use to operate or change the
terminal’s configuration. For each command, you will find the purpose, syntax for
commands sent from a network device, and bar code labels. The operating commands are
listed in alphabetical order.
• Backlight On and Off • Save Configuration in Flash Memory
• Change Configuration • Scanner Trigger On and Off
• Default Configuration • Set Time and Date
• Multiple-Read Labels • Test and Service Mode
• Reset Firmware
Backlight On and Off
Purpose: Turns the backlight on to easily view the terminal screen in dimly lit environments.
From Network: %.1
Keypad: Press  to turn the backlight on or off.
Scan:
Backlight On
*%.1*
*%.1*
Purpose: Turns the backlight off.
From Network: %.0
Keypad: Press  to turn the backlight on or off.
Scan:
Backlight Off
*%.0*
*%.0*
Note: You can use the command %. to toggle the backlight on and off.