Intermec Antares 2420

Co de 39
Nugget
Learning How to Use the Terminal
2-27
2
6. Hook the bottom edge of the battery door into the bottom case above the backup
battery compartment. Push the door down to close it over the battery compartment.
Push the battery door latch down and slide it toward the top end of the terminal to
lock the door in place.
242XU.088
Battery door
latch
Charging the Main Battery Pack
You can recharge the main battery pack using any of these TRAKKER Antares
accessories:
• Battery charger
• Communications dock connected to an external power supply
• Optical link adapter connected to an external power supply
The fastest way to charge the battery pack is to use the battery charger. The charger uses
a charging method that maximizes battery life. For help about charging battery packs, see
the accessory quick reference guides.
After you install a charged battery pack in the terminal, you can use the Battery Status
diagnostic in the TRAKKER Antares 2400 Menu System to check the charge status of
the batteries. For help, see Chapter 7, “Running Diagnostics.”