nuggetf
code39
Contents
v
Contents
Before You Begin xvii
Warranty Information xvii
Safety Summary xvii
Warnings and Cautions xviii
About This Manual xviii
Getting Started
What Are the TRAKKER Antares Terminals? 1-3
Accessories for the Terminal 1-4
Models and Options for the Terminals 1-6
Equipment You Need to Get Started 1-7
Using the Terminal for the First Time 1-8
Unpacking the Terminal 1-8
Charging the Main Battery Pack 1-8
Connecting the Backup Battery 1-9
Installing the Main Battery Pack 1-11
Charging the Backup Battery 1-14
Turning On the Terminal for the First Time 1-14
Setting the Time and Date 1-17
Configuring the Serial Port Parameters 1-19
Configuring the T2425 and the RF Network 1-23
Configuring the DCS 300, Host, and Access Points 1-24
Configuring the T2425 Network Parameters 1-24
Verifying That the T2425 Is Communicating Correctly 1-30
Starting the Application and Using the Terminal 1-31
Turning the Terminal On and Off 1-32
Enabling Bar Code Symbologies 1-33
What’s New on the TRAKKER Antares Terminals 1-35
Where Do You Go From Here? 1-35
1
To Next Page
Loading...
