nuggetf
code39
Manual Change Record (continued)
004 July 1998 An addendum (Part No. 067224-001) was added to this manual. The
addendum provides information for firmware version 3.2X:
• Configuring row spacing and video mode.
• The space/backspace key has been reversed. Press
f
for backspace and
press
f
for space.
• Four-digit date format.
• Configuring the optional 2MB flash memory.
• ISBT Code 128.
• Configuration commands to support COM4.
• Configuring the T2425 to work with DHCP.
• Receiving and transmitting files using YMODEM and XMODEM-1K.
• Information on the high density, long range, and high visibility scan
modules.
005 February 1999 This manual was revised to incorporate the addendum and to document new
information for firmware version 5.X:
• Information is included about using the APPTSK.BIN and EM9560.BIN
applications that are preloaded on the terminals.
• You now use a programmable terminal instead of a screen mapping
terminal to do screen mapping with the host through the DCS 300.
• Information is included about using the serial interface module for
COM4.
• XON/XOFF is allowed in Frame mode.
• New Set Time and Date reader command for 95XX terminal
compatibility.
006 August 1999 This manual was revised to remove the TRAKKER Antares Terminal
Emulation User’s Guide, Part No. 066694-003, and add the Important
Terminal Emulation Information sheet, Part No. 069993-001. Also added the
dcBrowser information sheet, Part No. 070012-001.
To Next Page
Loading...
