Intermec Antares 2420 - Models and Options for the Terminals

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
nuggetf
code39
1-6
Models and Options for the Terminals
The TRAKKER Antares family of terminals includes these models:
T2420 The T2420 is a programmable data collection terminal that has 512K of RAM
reserved for custom applications. The terminal has a 750K flash drive to store
applications and files. The T2420 has a serial port to transmit data to and accept data
from a host or PC via RS-232 serial communications.
T2425 The T2425 has the additional ability to communicate in Intermec’s 2.4 GHz
radio frequency (RF) network. The T2425 provides real-time communications to a host
either through the access points and DCS 300 or directly through the access points. The
T2425 is a programmable terminal that can run custom applications or terminal
emulation applications.
I/O
F1
F2
F4
F3
F5
Fn L
A
B
C
DE
F
G
H
IJ
K
L
M
NO
P
Q
RST
U
Z
VWXY
Fn R
Enter
7
8
9
4
5
6
1
2
0
3
Tab
Esc
242XU.035
I/O
F1
F2
F4
F3
F5
Fn L
A
B
C
DE
F
G
H
IJ
K
L
M
NO
P
Q
RST
U
Z
VWXY
Fn R
Enter
7
8
9
4
5
6
1
2
0
3
Tab
Esc
TRAKKER Antares 2420 TRAKKER Antares 2425
TRAKKER
ANTARES
2425
TRAKKER
ANTARES
2420
These options are available for the T2420:
• Modem
• Programmable terminal with alphanumeric keypad available to support English or
Western European languages
• 4MB flash drive, 2MB used for files or double-byte fonts
• Extended storage drive, 2MB or 4MB, for custom applications and files
These options are available for the T2425:
• UDP Plus (DCS 300 network) or TCP/IP (direct connect)
• IBM 3270 terminal emulation application and keypad
• IBM 5250 terminal emulation application and keypad
• VT100/220/320 and ANSI terminal emulation application and keypad
• Programmable terminal with alphanumeric keypad available to support English or
Western European languages
• 4MB flash drive, 2MB used for files or double-byte fonts