Intermec Antares 2420

Nugg
Co de 39
Running Diagnostics
7-15
7
Keypad Test
Purpose: An application programmer can use the Keypad Test screen to quickly find the
hexadecimal key code value, the decimal key code value, and the scan code for any key
on the keypad. You can also use the test to make sure the keypad is operating correctly.
Where Available: Hardware Diagnostics menu
Sample Screen:
242XU.133
KEYPAD TEST
Key Hex Dec Scan
'a' 61 97 1E
'b' 62 98 30
'c' 63 99 2E
'd' 64 100 20
'e' 65 101 12
'f' 66 102 21
'g' 67 103 22
'h' 68 104 23
'i' 69 105 17
'j' 6A 106 24
'k' 6B 107 25
'l' 6C 108 26
[Esc] Exit
Definition: Press any key or key combination on the keypad to display the hexadecimal, decimal, and
scan code value of the key. When you press ? , the terminal pauses for a few seconds to
display the values before you exit the screen. For a complete list of key codes, see the
“TRAKKER Antares Terminal Font Set” in Appendix C or refer to the
TRAKKER
Antares Application Development Tools System Manual (
Part No. 064433).