Intermec Antares 2420

Co de 39
Nugget
Configuration Command Reference
9-19
9
Code 2 of 5
Purpose: Enables or disables decoding of Code 2 of 5 symbology. Code 2 of 5 uses the bars to
encode information and the spaces to separate the individual bars. This code is discrete
and self-checking. You can only enable Code 2 of 5 if the Interleaved 2 of 5 (I 2 of 5)
code is disabled. If you enable I 2 of 5, Code 2 of 5 is automatically disabled.
Syntax: CC
data
where
data
consists of three digits as follows:
First digit: 0 Code 2 of 5, 3 Bar Start/Stop
1 Code 2 of 5, 2 Bar Start/Stop
Second and 00 Disable Code 2 of 5
third digits: 01-32 Label Length
Default: Disabled
Scan: To disable Code 2 of 5, scan this bar code:
Disable Code 2 of 5
*$+CC000*
*$+CC000*
Or: To enable Code 2 of 5:
1. Scan one of these bar codes:
Code 2 of 5, 3 Bar Start/Stop
*+/$+CC0*
*+/$+CC0*
Code 2 of 5, 2 Bar Start/Stop
*+/$+CC1*
*+/$+CC1*