TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-80
Parity
Purpose: Sets the parity for the serial port. The terminal uses parity for error checking in data
transmissions.
Syntax: YBn.data
where n is:
1 COM1 port
3 COM3 port
4 COM4 port
Acceptable values for data are:
0No parity
1 Even parity
2 Odd parity
Default: Even
Scan: One of these bar codes:
No Parity for COM1 Even Parity for COM1
*$+YB1.0* *$+YB1.1*
*$+YB1.0* *$+YB1.1*
Odd Parity for COM1
*$+YB1.2*
*$+YB1.2*
No Parity for COM3 Even Parity for COM3
*$+YB3.0* *$+YB3.1*
*$+YB3.0* *$+YB3.1*
Odd Parity for COM3
*$+YB3.2*
*$+YB3.2*
To Next Page
Loading...
