TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
N
ugg
Co de 39
5-4
Use a host application to download applications and files to the T2425
1. Create your applications using the TRAKKER Antares PSK or EZBuilder. For help,
see page 5-6.
2. Convert each application to a binary file using the PSK utility
EXE2ABS.EXE
. For
help, see page 5-8. Or, use the EZBuilder option to convert each application to a
binary file.
3. Copy the applications and files to the host.
4. Write an application for the host that can communicate with the T2425 directly via
an access point. Use the host application to download applications and files to the
T2425. For help, see “Transferring Files in a TCP/IP Direct Connect Network” in
Chapter 4.
Note: The host must be running a TFTP server.
5. Use the System Menu in the TRAKKER Antares 2400 Menu System to load and run
an application. For help, see page 5-17. Or, use the host application to send the Run
Program command.
About the TRAKKER Antares Programmable Terminals
The terminals ship loaded with a terminal emulation application or a sample application.
You can develop your own data collection application for the terminal and then download
the application to the terminal.
The main difference between the T2420 and T2425 is how you download files:
T2420 You download applications and files from a host computer to one terminal that
is directly connected through the serial port.
T2425 You download applications and files from the DCS 300 (UDP Plus) or host
(TCP/IP) to one or more terminals through the 2.4 GHz RF network. You can also
download applications and files to one T2425 using the serial port.
The next table lists specifications and technical information you need to know to develop
applications for the terminals.
To Next Page
Loading...
Need help?
General
