Configuring the Terminal
3-13
3
8. Choose another menu from the Terminal Menu or press
?
to exit. The Configuration
Menu appears.
For help exiting the menu system, see “Exiting the Configuration Menu” later in this
chapter.
Exiting Screens and Saving Changes
When you exit a screen, you can save or discard your changes:
Task Description
To exit a screen and save the changes Choose OK and press
. Or, press
with
the cursor in any field except the Cancel button.
To exit a screen and discard the changes Choose Cancel and press
. Or, press
?
with the cursor in any field.
Exiting the Configuration Menu
1. Press
?
to exit the Configuration Menu. If you have made any changes to the
current configuration, this screen prompts you to save the new configuration in
RAM.
The current configuration (also called the runtime configuration) is the set of
parameters currently enabled on the terminal.
Save new
configuration
(in RAM)?
242XU.059
Yes No
CANCEL
2. Choose Yes and press
to save your changes in RAM and update the current
configuration on the terminal. Choose No and press
to exit without changing the
configuration. The Main Menu appears.
3. Choose another menu from the Main Menu or press
?
to exit the TRAKKER
Antares 2400 Menu System.
For help exiting the menu system, see the next procedure for “Exiting the
TRAKKER Antares 2400 Menu System.”
To Next Page
Loading...
