TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
2-26
Installing the Battery Pack
242XU.102
5. If you are using an Intermec-labeled battery pack (Part No. 063278), make sure you
remove the rubber bumper from the inside of the battery door. Otherwise, you will
not be able to close the door.
If you are using a Sony-labeled battery pack, make sure the rubber bumper is
installed over the ridge near the wall on the inside of the battery door. The rubber
bumper on the battery door keeps the battery pack in place.
Rubber bumper
Ridge
Wall
Battery door
242XU.148
To Next Page
Loading...
