TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
3-18
To save configuration changes using the menu system
1. Press
T3,
or scan this bar code. The Main Menu appears.
Enter Test and Service Mode
*..-.*
*..-.*
2. Choose System Menu and press
. The System Menu appears.
SYSTEM MENU
File Manager
Load Default Values
Set Time and Date
Store Configuration
Upgrade Firmware
_` Select item
[Enter] Next screen
[F1] Help
[Esc] Exit
242XU.051
3. Choose the Store Configuration command and press
. The Store Configuration
screen appears.
STORE CONFIGURATION
Store Configuration
in Flash Memory
242XU.072
CANCELOK
4. Choose OK to save the configuration in flash memory. To exit without saving the
configuration, choose Cancel. The System Menu appears.
5. Press
?
to exit the System Menu. The Main Menu appears.
6. Choose another menu from the Main Menu or press
?
to exit the TRAKKER
Antares 2400 Menu System.
To Next Page
Loading...
