Configuring the Terminal
3-23
3
6. Choose Upgrade Firmware and press
. The Upgrade Firmware screen appears.
UPGRADE FIRMWARE
Upgrade terminal
firmware?
Make sure the
terminal is
connected to a host
computer through the
optical adapter.
242XU.074
OK CANCEL
7. Choose OK to continue. The next screen appears.
Are you sure you
want to continue?
Selecting YES will
upgrade and replace
all of the
terminal's firmware.
Selecting NO will
exit without
upgrading firmware.
242XU.152
YES NO
8. Choose Yes to continue and upgrade the firmware. The terminal reboots and then
displays the Loader Waiting screen.
To exit without upgrading the firmware, choose No.
Note:
If you reach the Loader Waiting screen and cannot upgrade or continue,
press
?
or
L
to exit without upgrading the firmware. The Boot Menu appears.
Press
!
to boot the terminal and continue.
9. On your PC, make sure you selected the COM port and Firmware Type, and then
choose OK. The PC downloads the firmware and application. Once the download is
complete, the terminal boots and runs the application. Repeat these instructions to
upgrade the firmware on another terminal.
For help with the TRAKKER Antares firmware installation utilities, see the
README.TXT
instructions that ship with the utility or use the online help.
To Next Page
Loading...
