Configuring the Terminal
3-31
3
Terminal Operations Table (continued)
Parameter (Syntax) Options Location in Configuration Menu
Scanner Mode (SB)
One-Shot mode
Automatic mode
Terminal Menu,
Scanner option
Scanner Redundancy (SR)
None
Normal
High
Terminal Menu,
Scanner option
Scanner Selection (SS)
(See the Note)
All compatible scanners
146X CCD scanners
151X laser scanners
1545 laser scanner
Symbol scanners
155X laser scanners
Tethered Long Range
Intg. Long Range No Aim
Intg. Long Range Short Aim
Intg. Long Range Long Aim
Terminal Menu,
Scanner option
Scanner Timeout (SA)
0 (disabled)
0 – 60 seconds
Terminal Menu,
Scanner option
Scanner Trigger (SC)
Level
Edge
Terminal Menu,
Scanner option
Time in Seconds (DA)
Disabled
Enabled
Terminal Menu,
Append Time option
Note:
The Scanner Selection command is only used when you have a module for cabled scanners, a long range
scan module, or a high density scan module installed.
To Next Page
Loading...
