Intermec Antares 2420 - Page 188

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
N
ugg
Co de 39
5-16
7. In the Initialization Data box, choose File.
8. In the field, type:
\ filename
where filename is the name of the executable binary application. Or choose Find,
select your application, and choose OK.
9. Enable the Binary file check box.
10. Enable the Overwrite option button to overwrite an existing file with the same name.
11. In the Target file name field, type a name if you want to save the file under a
different name on the terminal.
Do NOT enter a slash or backslash character before the target filename.
12. Choose Add. The file appears in the Files and Data list box with a B for binary in the
leftmost column.
13. Repeat Steps 7 through 12 to select another application.
14. You can also download files used by your application such as an employee list or a
part number list.
To download additional files, choose File in the Initialization Data box. Type in the
filename including the backslash. Disable the Binary file check box and then choose
Add.
15. Choose OK to save your changes and return to the Terminal Download
Configuration dialog box.