Nugg
Co de 39
Using Custom Applications
5-19
5
4. Press
to select drive C or type in the letter of the drive you want to manage and
then press
. The File Manager screen appears listing all the files stored on the
drive.
FILE MANAGER
C:APPTSK.BIN 06144
C:VTTCP-D.BIN 0196K
C:TEANT.CFG 00274
00572654 Bytes Free
[Enter] Run App
[F7] Rename
[DEL] Delete
[F1] Help [Esc] Exit
242XU.179
5. Press
V
or
:
to choose an application and then press
. The terminal boots, resets
all firmware, and runs the application.
If you also made configuration changes while you were working in the menu system,
you will be prompted to store your changes in flash memory. Once you save or
discard the changes, the terminal boots, resets all firmware, and runs the application.
Note: You can press
to rename a file or
to delete a file.
You can begin using the application to collect data. Repeat the instructions in this section
to run another application on the terminal. If you have problems running an application,
see Chapter 6, “Troubleshooting.”
To Next Page
Loading...
