Nugg
Co de 39
Reader Command Reference
8-19
8
Scan: 1. Scan this bar code label:
Enter Accumulate Mode / Receive File
*/K/O./ER/L*
*+/.%R,*
2. Scan the bar code label(s) for the file you want to receive. You can scan labels from
the “Full ASCII Bar Code Chart” in Appendix B. The label must use this format:
fromfilename,drive:tofilename
3. Scan this bar code label to exit Accumulate mode and receive the file.
Exit Accumulate Mode
*-/*
*-/*
Or: You can create your own bar code labels to receive files by creating a bar code in this
command format:
.%R,
fromfilename,drive:tofilename
Example: To receive the file
SHIPPING.BIN
on the terminal’s drive C, use this command:
.%R,shipping.bin,c:shipping.bin
To Next Page
Loading...
