TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-14
Baud Rate (continued)
2. Scan the serial port from these bar codes:
COM1 COM3
*1.* *3.*
*1.* *3.*
COM4
*4.*
*4.*
3. Scan the baud rate from these bar codes:
1200 Baud 2400 Baud
*3* *4*
*3* *4*
4800 Baud 9600 Baud
*5* *6*
*5* *6*
19200 Baud 38400 Baud
*7* *8*
*7* *8*
4. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
5. Repeat Steps 1 through 4 to se the baud rate for another serial port.
Notes: For COM1 only. To provide compatibility with earlier TRAKKER Antares firmware
versions, you can also use this syntax:
IAdata
where data is a value from 3 to 8.
To Next Page
Loading...
