Co de 39
Nugget
Configuration Command Reference
9-23
9
Second digit: 0 Discard check digit
1 Transmit check digit
Third digit: 0 Code 39 non-full ASCII
1 Code 39 full ASCII
2 Code 39 mixed-full ASCII
Note:
Selecting HIBC Code 39 automatically sets the configuration to non-full ASCII
with the check digit transmitted.
Default: Enable Code 39 Full ASCII with no check digit (111)
Scan: To disable Code 39:
Disable Code 39
*$+CB0*
*$+CB0*
Or: To enable Code 39:
1. Scan this bar code:
Enter Accumulate Mode / Enable Code 39
*+/$+CB*
*+/$+CB*
2. Scan one of these bar codes to set the first digit:
Without a Check Digit With a Check Digit
*1* *2*
*1* *2*
HIBC Code 39 With AIAG Check Digit
*3* *4*
*3* *4*
3. Scan one of these bar codes to set the second digit:
Discard Check Digit Transmit Check Digit
*0* *1*
*0* *1*
To Next Page
Loading...
