nuggetf
code39
Getting Started
1-15
1
Note:
If the Boot Menu screen does not appear, you may have a problem with the
batteries. Make sure the main battery pack is fully charged and installed correctly.
For help, see Chapter 6, “Troubleshooting.”
2. Press
!
to boot the terminal and initialize the firmware. The TRAKKER Antares
screen appears.
VERSION 5.XX
COPYRIGHT 1996-1999
242XU.121
The next screen or messages you see depend on the type of application that is loaded
on the terminal.
T2420 or T2425 Programmable Terminal The sample application screen appears
with information about the radio. You create custom applications for the terminal
using the TRAKKER Antares Programmer’s Software Kit (PSK) or EZBuilder and
Microsoft C/C++ functions. A T2420 does not have a radio (see the next illustration)
and the radio is not initially enabled on the T2425.
96/01/01 12:00:00
No Radio in System.
242XU.176