Co de 39
Nugget
Learning How to Use the Terminal
2-11
2
To type characters with an accent mark
1. Press
. The Function Right icon appears on the terminal’s screen.
2. Press the function key that the accent mark appears above. For example, press
to
type the umlaut (¨).
To Type Press
ˆ (circumflex)
` (grave)
¨ (umlaut)
´ (acute)
~ (tilde)
A special Function Right icon appears with a third line to indicate that an accent
mark is stored in the keypad buffer.
242XU.115
f
To flush the accent mark from the keypad buffer without entering any key, press
twice. The icons disappear from the terminal’s screen.
3. There are three types of characters you can enter:
• To accent a lowercase character, press the character. For example, press
to
type the ä character.
• To accent an uppercase character, press the
key. Next, press the character
you want to accent. For example, press
and release the key, and then press
to type the Ä character.
• To type the accent mark by itself, press the
d
key.
The accented character or accent mark appears on the screen and the special
Function Right icon disappears.
If you try to accent a character and the resulting character is not supported on the
terminal, the plain (unaccented) character displays on the terminal screen. For a complete
list of the English and Western European characters available in the terminal font, see
Appendix C, “International Character Support.”
To Next Page
Loading...
