Juniper EX9208 Hardware Guide

Table 41: EX9200 Switch Component Power Requirements (continued)
Reserved Power (watt)Typical Power (watt)Component
607 W511 WEX9200-6QS line card
534 W461 WEX9200-MPC line card
29.8 W29.8 WEX9200-10XS-MIC
37 W37 WEX9200-20F-MIC
41 W41 WEX9200-40T-MIC
545 W465 WEX9200-12QS line card
610 W550 WEX9200-32XS line card
239 W206 WEX9200-40T line card
239 W219 WEX9200-40F line card
239 W219 WEX9200-40F-M line card
545 W465 WEX9200-40XS line card
Related
Documentation
EX9204 Switch Hardware Overview•
• EX9208 Switch Hardware Overview on page 3
• EX9214 Switch Hardware Overview
AC Power Supply Specifications for EX9208 Switches
Table 42 on page 92 lists the power supply specifications for an AC power supply used
in EX9208 switches.
Table 42: AC Power Supply Specifications for an EX9208 Switch
SpecificationsItem
Operating range:
•
Low-voltage line: 100–120 VAC
•
High-voltage line: 200–240 VAC
AC input voltage
50–60 HzAC input line frequency
•
Low-voltage line: 16 A
•
High-voltage line: 15.1 A
AC input current rating
Copyright © 2017, Juniper Networks, Inc.92
EX9208 Switch Hardware Guide

Juniper EX9208 Specifications

General

Brand	Juniper
Model	EX9208
Category	Switch
Language	English