Juniper EX9208 - Chapter 34 Maintenance and Operational Safety Warnings; Maintenance and Operational Safety Guidelines and Warnings; Battery Handling Warning

CHAPTER 34
Maintenance and Operational Safety
Warnings
•
Maintenance and Operational Safety Guidelines and Warnings on page 343
Maintenance and Operational Safety Guidelines and Warnings
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
This topic also applies to hardware devices in the QFX Series, to OCX1100 switches, and
to NFX250 devices.
While performing the maintenance activities for devices, observe the following guidelines
and warnings:
•
Battery Handling Warning on page 343
•
Jewelry Removal Warning on page 344
•
Lightning Activity Warning on page 346
•
Operating Temperature Warning on page 346
•
Product Disposal Warning on page 347
Battery Handling Warning
WARNING: Replacing a battery incorrectly might result in an explosion.
Replace a battery only with the same or equivalent type recommended by
the manufacturer. Dispose of used batteries according to the manufacturer's
instructions.
Waarschuwing Er is ontploffingsgevaar als de batterij verkeerd vervangen
wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat
door de fabrikant aanbevolen is. Gebruikte batterijen dienen overeenkomstig
fabrieksvoorschriften weggeworpen te worden.
343Copyright © 2017, Juniper Networks, Inc.