•
EN 55024
•
EN 300386
•
EN 61000-3-2 Power Line Harmonics
•
EN 61000-3-3 Voltage Fluctuations and Flicker
•
EN 61000-4-2 ESD
•
EN 61000-4-3 Radiated Immunity
•
EN 61000-4-4 EFT
•
EN 61000-4-5 Surge
•
EN 61000-4-6 Low Frequency Common Immunity
•
EN 61000-4-11 Voltage Dips and Sags
Related
Documentation
Compliance Statements for EMC Requirements for EX Series Switches on page 368•
• Compliance Statements for Acoustic Noise for EX Series Switches on page 372
Battery Compliance Statement for Environmental Requirements for EX Series Switches
EX6200 and EX8200 Ethernet switches contain lithium batteries.
Batteries used in these switches are not based on substances containing mercury, lead,
or cadmium. The batteries used in these switches comply with EU Directives 91/157/EEC,
93/86/EEC, and 98/101/EEC. The product documentation includes instructional
information on the proper method of reclamation and recycling.
Related
Documentation
Agency Approvals for EX Series Switches on page 367•
• Compliance Statements for EMC Requirements for EX Series Switches on page 368
Compliance Statements for EMC Requirements for EX Series Switches
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
This topic describes the EMC requirements for these hardware devices for:
•
Canada on page 369
•
European Community on page 369
•
Israel on page 369
•
Japan on page 370
•
Korea on page 370
•
United States on page 370
Copyright © 2017, Juniper Networks, Inc.368
EX9208 Switch Hardware Guide
To Next Page
Loading...
Need help?
General
