Juniper EX9208 Hardware Guide

Table 23: Line Card Models for EX9200 Switches (continued)
SF Module
Required
First Junos OS
ReleaseDescriptionModel number
EX9200-SF or
EX9200-SF2
12.3R2A line card with 32 10-Gigabit
Ethernet ports
See “EX9200-32XS Line Card”
on page 64
EX9200-32XS
EX9200-SF or
EX9200-SF2
12.3R2A line card with 40
10/100/1000BASE-T ports that
support RJ-45 connectors
See “EX9200-40T Line Card”
on page 65
EX9200-40T
EX9200-SF or
EX9200-SF2
12.3R2A line card with 40 1-Gigabit
Ethernet ports
See “EX9200-40F Line Card”
on page 67
EX9200-40F
EX9200-SF or
EX9200-SF2
14.2R1A line card with 40 1-Gigabit
Ethernet ports with Media
Access Control Security
(MACsec) capability
See “EX9200-40F-M Line
Card” on page 68
EX9200-40F-M
EX9200-SF216.1R1A line card with 40 10-Gigabit
Ethernet ports with Media
Access Control Security
(MACsec) capability, each of
which can house 10-gigabit
small form-factor pluggable
plus (SFP+) transceivers
See “EX9200-40XS Line Card”
on page 70
EX9200-40XS
Ensure that all of the line cards in a switch are supported in the Junos OS release that
you want to use.
Related
Documentation
EX9204 Switch Hardware Overview•
• EX9208 Switch Hardware Overview on page 3
• EX9214 Switch Hardware Overview
EX9200-2C-8XS Line Card
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces in a single assembly. Line cards are field-replaceable units (FRUs) that you
53Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Line Cards

Juniper EX9208 Specifications

General

Brand	Juniper
Model	EX9208
Category	Switch
Language	English